How Apply Wood Appliques For Furniture

Author: admin | Categories: Wood Furniture comments
Beautiful Wood Appliques For Furniture

How Apply Wood Appliques For Furniture – Appliques Wood is an element that is carved in detail are used as decorative home furnishings, which change the furniture unattractive becomes more beautiful and elegant. For best results in the application of wood appliques that is with paint or stain the wood appliques before attaching them to your furniture. Or unless you intend to paint the entire area furniture the same color, including appliques.

Wipe the back of each wood appliques for furniture using a soft cloth to remove dust attached. If necessary, dampen the cloth slightly to remove impurities. Wipe project cuts down well in all areas where you plan to install appliques. Hold applique against cuts jobs to find the ideal position for it. If it is difficult to tell from the close, make one or two painters tape loop, stick them in the back of the appliqué, and then press the applique on the project. Stand back and look at the project from a distance, then adjust the required applique. Use a tape measure and pencil to align each applique so that the level and aligned to your liking. With a small pencil mark to show the bottom and side edges of each applique on a piece of furniture, or use a small piece of painters tape if you do not want to mark furniture.

Position the horizontal part of the project, if possible, so that gravity helps your efforts to secure wood appliques for furniture. For example, if the front decoration drawer removes it from the furniture and places it so the front is facing upwards before applying the applique. Fold the applique soft cloth and place face down on it. Apply a thin bead of adhesive elastomeric asleep around applique, stay a minimum of 1/8-inch from the edge. Apply more caulk into the inner area so that no more than a half-inch of space to sleep freely in any direction on the back of the applique. Press applique, adhesive-side down, to pieces of the project, using a pencil or a tape mark as a guide. Allow the adhesive to dry completely for a few hours or as recommended on the packaging adhesives.

Comments are closed.